Japan's construction steel market has steadily increased

Japan's construction steel market has steadily increased Recently, Japanese steel mills have raised the price of construction long products (a type of steel product) to cope with the steady demand from the domestic construction industry and the rising prices of international steel prices and raw materials. It is understood that in July, Nippon Steel & Sumitomo Metal Co., Ltd. will use H-shaped steel. The contract price was increased by 3,000 yen/tonne ($30/tonne). Tokyo Steel's actual price of all long products in August was increased by the same amount, but may not be fully penetrated due to the previous price increase. Month Kaiping. In addition, all of Yamato Steel’s steel and Kishiwada Steel’s rebar prices were increased by 3,000 yen per ton in August. At present, the basic specifications of the Tokyo market are maintained at a price of 7.0 to 71,000 yen/ton (699-709 U.S. dollars/ton), and rebar prices are maintained at 60 to 61,000 yen/ton (599 to 609 U.S. dollars/ton).

The Ministry of Land, Infrastructure and Transport of Japan predicts that during the midsummer of August, the demand for the construction industry in Japan will be 5.3% lower than the previous period, but it will still increase by 8.2% year-on-year to 1.8 million tons. In addition, the impact of the steel overhaul plan on production will also provide support for price increases, and it is expected that the Japanese construction steel market will steadily increase in the later period.

 is a polymer material which has a higher comprehensive performance and can be use in long-term temperature above 150 ℃.It is mainly used in the field of high technology .So we also call it as the high performance engineering plastics or heat resistant engineering plastics.

This kind of material has excellent characteristics of light weight, high strength , good heat resistance and others and its application is from the original national defense and aerospace to the field of car, equipment, high-end consumer goods and many civilian areas.

There are many kinds of Advanced Plastic produced by Dongguan Noegem Plastic Product Co.,Ltd .

1. Production:

Polyphenylene sulfide plastic sheet (PPS plastic sheet),

Brief introduction

PPS plastic which also called Polyphenylene sulfide.On the primary key is extremely dense and sulfur atoms of benzene ring, thermoplastic resin is high rigidity, high crystallinity, have higher strength and modulus, products can be used in the 200 ~ 224 ℃, 250 ℃ under the main performance.


2. Production:  

Polyether imide plastic sheet (PEI plastic sheet),

Antistatic polyether imide plastic sheet (ESD PEI  plastic sheet),

Conductive polyether imide plastic sheet (CON PEI plastic sheet)

Polyether imide plastic rod (PEI plastic rod),

Antistatic polyether imide plastic rod(ESD PEI  plastic rod),

Conductive polyether imide plastic rod (CON PEI plastic rod)

Brief introduction:

PEI plastic is characterized by high intensity, high rigidity, abrasion resistance and dimension stability.PEI plastic is a transparent solid of amber, which has inherent flame retardancy and low smoke intensity without adding any additives. The oxygen index is 47% and the combustion level is ul94-v-0.

PEI plastic is 1.28 ~ 1.42 g/cm3 density, glass transition temperature is 215 ℃, thermal deformation temperature of 198 ~ 208 ℃, can use for a long time under 160 ~ 180 ℃, allows intermittent maximum temperature of 200 ℃

PEI plastic has excellent mechanical strength, electric insulation, radiation resistance, high and low temperature resistance and fatigue resistance and molding processability;The addition of , carbon fiber or other filler can enhance the modification purpose.




3. Production:

Polyether ether ketone plastic sheet (PEEK plastic sheet),

Antistatic polyether ether ketone plastic sheet (ESD PEEK plastic sheet),

Conductive polyether ether ketone plastic sheet (CON PEEK plastic sheet),

Polyether ether ketone plastic rod(PEEK plastic rod),

Antistatic polyether ether ketone plastic rod(ESD PEEK plastic rod),

Conductive polyether ether ketone plastic rod (CON PEEK plastic rod),

Brief introduction:

Polyetheretherketone (PEEK) plastic is a kind of excellent performance of special engineering plastics, has more significant advantages compared with other special engineering plastics..Can be used for high-end technology such as mechanical, nuclear engineering and aviation.

Advantage :

1)Excellent chemical resistance and hydrolysis resistance

2)Excellent physical and mechanical properties

3)Resistance to high temperature is 260 degrees,

4) light and good dimensional stability

5 )excellent flame retardancy

6)Good electrical insulation and electrical stability

7 )it can be mixed, easy to process composite

8)Good self-lubrication


4. Production:

polyphenyl ether plastic sheet(PPO plastic sheet ).

Brief introduction

PPO plastic is a special kind of , which has many features that other engineering plastics do not have:

1. Transparency: PPO plastic is one of the few transparent plastics;

2. Non-toxic: PPO plastic itself is less toxic and more suitable for food and medical applications;

3. Low temperature resistance: the low temperature of the PPO in the low temperature of minus 170 degrees centigrade, which is a lot of engineering plastic;

4. Low gravity: 1.08 g/cubic cm is slightly more dense than water;


Main features of Advanced Plastic 

Heat temperature of 150 ~ 300 ℃

Advantages :

1).Good in heat resistance,

2).Good chemical resistance and radiation performance,

3).Good flame retardancy

4).Good stiffness, strength, toughness, creep, abrasion and other comprehensive mechanical properties.

Application: space aviation, defense military industry, nuclear power, electronics, transportation, machinery manufacturing, medical devices and other civil fields.

Advanced Plastics (160-220℃)

Advanced Plastic,Advanced Technology Plastic,Excellent Quality Advanced Plastic

Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com